|
|
We endeavor to make our Cisco TelePresence products interoperable with all
relevant standards-based equipment. Although it is not possible to test all
scenarios, the testing on which this data is based covers most common functions
of the listed endpoints and infrastructure.
The following pages describe the software releases that were tested for
interoperability with Cisco TelePresence products. The results are grouped by
product range. It is not possible to guarantee that all the models listed in the
Product(s) column have been tested with the specified software release, although
to the best of our knowledge we believe that all such models are interoperable
with the associated software release. The absence of a device or release does
not imply a lack of interoperability.
Cisco TelePresence
| Product(s) |
Software release | Comments |
|---|
| Cisco Jabber Video for TelePresence (Movi) |
v4.2 |
In an H.323-SIP interworked call between the Telepresence Server and Movi, Movi may continue to show content (such as a presentation) even when the content has stopped. Using a SIP call without interworking should improve this. |
| Cisco TelePresence Content Server |
S5.0 |
Tested H.323 and SIP interoperability; no issues found. |
| Cisco TelePresence System (CTS) Endpoints, Cisco TelePresence System 500-37, 1000, 1100, 1300-65, 3000, 3010, 3200, and 3210 |
1.7.4 |
Tested TIP interoperability; no issues found. |
| Cisco TelePresence System 500-37, 1000, 1100, 1300-65, 3000, 3010, 3200, and 3210 |
1.7.2 |
Tested TIP interoperability; no issues found. |
| Cisco TelePresence System 500-37, 1000, 1100, 1300-65, 3000, 3010, 3200, and 3210 |
1.10 |
Tested to work with TelePresence Server (TS) running 2.2 registered to VCS version X7.2, X7.1, or X7.0, if the system running CTS 1.10 is registered to a Cisco Unified Communications Server running software release 9.1(1) or 8.6(2a)SU3.
We recommend that you install and assign the Cisco Unified CM "vcs-interop" SIP Normalization script to make secure calls between CTS endpoints and endpoints and devices registered to VCS.
For more information about the conditions required for secure calls, see this document:
http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_8/release/notes/cts_1_8_release_notes.html#wp138743
For more information about the Cisco Unified CM script, see this document:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_6_2/cucm-rel_notes-862.html#wp1961382
For more information about configuring Cisco Unified CM and Cisco VCS to interoperate via a SIP trunk, see this document:
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf
For more information about products that are compatible with systems running CTS 1.10 software, refer to the Cisco TelePresence System Software Version Compatibility - 1.10 Releases document at the following URL: http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_10/compatibility/cts_compatibility_1_10.html
|
| Cisco TelePresence System TX 1300 47, Cisco TelePresence System 500-32, Cisco TelePresence System TX1300 47, Cisco TelePresence System TX1310 65, Cisco TelePresence System TX9000, Cisco TelePresence System TX9200 |
TX6.0.0 |
Tested to work with TelePresence Server (TS) ) running 2.2 registered to VCS version X7.2, X7.1, or X7.0, if the system running TX6.0 is registered to a Cisco Unified Communications Server running software release 9.1(1) or 8.6(2a)SU2.
We recommend that you install and assign the Cisco Unified CM "vcs-interop" SIP Normalization script to make secure calls between CTS endpoints and endpoints and devices registered to VCS.
For more information about the conditions required for secure calls, see this document:
http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_8/release/notes/cts_1_8_release_notes.html#wp138743
For more information about the Cisco Unified CM script, see this document:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_6_2/cucm-rel_notes-862.html#wp1961382
For more information about configuring Cisco Unified CM and Cisco VCS to interoperate via a SIP trunk, see this document:
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf
For more interoperability information for systems running TX6.0 software, refer to the Cisco TelePresence System Software Version Compatibility - 1.10 Releases document at the following URL: http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_10/compatibility/cts_compatibility_1_10.html#wp125923 |
| Edge Series, Cisco TelePresence System 1000 MXP, Tandberg 1500 MXP, Cisco TelePresence System 1700 MXP, MXP 2000, MXP 3000, MXP 6000, MXP 7000, MXP 770, MXP 8000, MXP 880, MXP 990, Cisco TelePresence System MXP Series |
F9.0 |
Tested H.323 and SIP interoperability; no issues found. |
Cisco
| Product(s) |
Software release | Comments |
|---|
| Cisco Unified Communications Manager |
7.1.5.10000-12 |
The following TelePresence Server 2.2 features are not supported when interoperating with this version of CUCM:
- Autodetection of CTS endpoints
- Trunking to CUCM
|
| Cisco Unified Communications Manager |
8.5.1.10000-26 |
No issues found. |
| Cisco Unified Communications Manager |
8.6.1.10000-19 |
No issues found. |
| Cisco Unified IP Phone 9971 |
9.1(2) |
Tested SIP interoperability; no issues found. |
| Cisco Unified Personal Communicator |
8.5(1) |
Tested SIP interoperability; no issues found. |
| Cisco Unified Video Advantage |
2.2(1.7) |
Tested SIP interoperability; no issues found. |
Aethra
| Product(s) |
Software release | Comments |
|---|
| X3 |
11.2.2 |
Tested H.323 interoperability; no issues found. |
GNU
| Product(s) |
Software release | Comments |
|---|
| Gatekeeper (GnuGk) |
2.3.1 |
No issues found. |
LifeSize
| Product(s) |
Software release | Comments |
|---|
| Room |
4.7.13(22) |
Tested H.323 and SIP interoperability; known limitations:
- TLS encrypted SIP calls do not work.
- The endpoint does not support BFCP hence SIP content does not work.
- G.722.1 Annex C audio does not work.
|
| Room 200 |
4.7.17(1) |
Tested H.323 and SIP interoperability; known limitations:
- TLS encrypted SIP calls do not work.
- The endpoint does not support BFCP hence SIP content does not work.
- G.722.1 Annex C audio does not work.
|
Polycom
| Product(s) |
Software release | Comments |
|---|
| HDX 8000 |
2.6.1.3-5205, 3.0.0.2-13047 |
Tested H.323 and SIP interoperability; known limitations:
- SIP content does not work on calls placed out from the TelePresence Server to this endpoint.
- SIP content is supported on incoming calls from this endpoint; however, automatic content handover does not work when the endpoint tries to take over content sharing. Stopping and restarting the content works around this issue.
|
| PathNavigator |
7.00.03 |
No issues found. |
| QDX 6000 |
3.0.2181 |
Tested H.323 interoperability; no issues found.
The endpoint does not support SIP. It also does not support interworking via VCS. |
| RPX 200 |
2.6 |
Tested H.323 interoperability; no issues found. |
| ViewStation 512, ViewStation SP, FX |
7.5.4 |
Tested H.323 interoperability; no issues found. |
| VSX 7000e, VSX 7000 |
9.0.6.1 |
Tested H.323 interoperability; no issues found. |
| VVX 1500 |
3.2.2.0481 |
Tested H.323 and SIP interoperability; no issues found. |
RadVision
| Product(s) |
Software release | Comments |
|---|
| Scopia XT1000 |
01.00.0014 |
Tested H.323 and SIP interoperability; no issues found. |
Sony
| Product(s) |
Software release | Comments |
|---|
| PCS-1 |
3:42 |
Tested H.323 and SIP interoperability; no issues found. |
| PCS-G50 |
2.64 |
Tested H.323 interoperability; no issues found.
Tested interworking to SIP via VCS; known limitation:
- Content is not supported when interworking to SIP via VCS.
|
| PCS-HG90 |
2.22.00 |
Tested H.323 interoperability; no issues found.
Tested interworking to SIP via VCS; known limitations:
- Only supports Voice Only calls unless the bandwidth to the endpoint is greater than 410 kbps (however, the HG-90 does transmit video below this bitrate)
- If the HG-90 is dialled in to a conference, it will become a Voice Only call if the TelePresence Server is set to transmit video in 4:3 ratio only.
|
|
Feedback