Cisco TelePresence

Interoperability Database

Warning - In preview mode

Hierarchical Navigation

We endeavor to make our Cisco TelePresence products interoperable with all relevant standards-based equipment. Although it is not possible to test all scenarios, the testing on which this data is based covers most common functions of the listed endpoints and infrastructure.

The following pages describe the software releases that were tested for interoperability with Cisco TelePresence products. The results are grouped by product range. It is not possible to guarantee that all the models listed in the Product(s) column have been tested with the specified software release, although to the best of our knowledge we believe that all such models are interoperable with the associated software release. The absence of a device or release does not imply a lack of interoperability.

Cisco TelePresence System EX Series software version TC5.1.2

Show data for version: TE6.0TC7.3.4TC7.3.3TC7.3TC7.1TC7.0.2TC7.0.1TC6.3TC6.1TC6.0.0TC6.0.0TC5.1.7TC5.1.4TC5.1.2TC4.0.0

Cisco TelePresence

Product(s) Software releaseComments
Cisco TelePresence Server 3.0(2.24)

Tested CUCM to VCS/Conductor SIP, CUCM to VCS H.323 interworking, SIP, and H.323 interoperability.

  • Under some circumstances there is an echo from the EX90 when sending it stereo audio when on speaker. To work around this, turn off the directional audio on the TelePresence Server or use a headset. (Issue identifier CSCud79705)
  • When EX60 endpoints connect to the TelePresence Server via a VCS which is interworking the calls from SIP to H.323, then sending content to that EX endpoint will fail. To work around this issue use either H.323 or SIP throughout the call to avoid interworking. (Issue identifier CSCud81537)